Edit · Color 9 min

Color, proofing, and print

A CMYK conversion and a printed page are the moment a file leaves the screen. PhotoCraft has the menus for that work. A press deadline is still the wrong job for this early alpha.

Change the mode on a copy

Image, then Mode, sets how the document stores color: Grayscale, RGB Color, CMYK Color, Lab Color, Indexed Color, Duotone, Bitmap, or Multichannel. Below those names, 8 Bits/Channel, 16 Bits/Channel, and 32 Bits/Channel set the depth. A move into a smaller mode, such as CMYK or Indexed Color, can change colors. Keep a copy of the RGB original. That copy is the same habit as Open and save a PSD without losing the original.

The README describes the same families at 8, 16, and 32 bits, with ICC profiles. The menu steps on this page come from the official workflows guide, checked 21 November 2026: PhotoCraft workflows.

Profile commands. Assign changes the label. Convert changes the pixels.
CommandWhat changes
Edit, then Color Settings. Ctrl+Shift+KWorking color spaces, and what PhotoCraft does when a file profile differs from them. On a Mac, Ctrl is Command.
Edit, then Assign ProfileA different profile label. The pixels stay as they were. Only profiles that fit the document mode are offered.
Edit, then Convert to ProfileThe pixels change so the picture is meant to look the same in the new profile.

Preview the print color on the screen

View, then Proof Setup, then pick a profile, then turn on View, then Proof Colors. The chord is Ctrl+Y. View, then Gamut Warning, Ctrl+Shift+Y, marks colors that profile cannot reproduce. Edit, then Preferences, then Transparency & Gamut, sets how the warning looks. On a Mac, preferences are PhotoCraft, then Settings.

A soft proof is a preview. It does not write the file. The flat file you send is still Send a flat picture and keep the layers. The troubleshooting page lists an open report that the eyedropper shows slightly different values on a CMYK JPEG: PhotoCraft troubleshooting. Treat a sample on that kind of file as a check, and keep the original. Whether a press job belongs on this alpha is What early alpha means.

Print, or save a PDF from the same dialog

File, then Print, is Ctrl+P. Pick a printer under Printer and set Copies. Choose the Paper and the Orientation, then position and size the image. Scale to Fit Media fills the page. You can also drag the image on the preview. Printing Marks adds crop and registration marks.

Under Color Management, choose who handles color: Printer Manages Colors, PhotoCraft Manages Colors, or No Color Management. If you choose PhotoCraft Manages Colors on Windows, turn the printer color management off in Print Settings. Check the preview, then click Print. When the job is sent, the status bar says Sent to, followed by the printer name.

File, then Print One Copy, is Ctrl+Alt+Shift+P. It prints one copy with the settings of the last print. If you have not printed yet, it opens the dialog. To make a PDF instead of printing, use the Save as PDF box at the bottom of the dialog. On Linux, PhotoCraft prints through CUPS. If it finds no printer there, it opens the system print dialog. The Flatpak uses the CUPS service on the computer.

Decide what the conversion is allowed to change

A move to CMYK, Indexed Color, Duotone, Bitmap, or a lower bit depth can change colors. The RGB file at the original depth is the rollback, and it should be a separate file before you convert. Assign Profile only changes the label, and it only offers profiles that fit the document mode. Convert to Profile changes pixels so the picture is meant to look the same under the new profile. Color Settings, Ctrl+Shift+K, is where the working spaces live, and where PhotoCraft is told what to do when a file’s profile does not match them. Proof Colors, Ctrl+Y, after Proof Setup, is a preview. It does not write the file. Gamut Warning, Ctrl+Shift+Y, marks colors the proof profile cannot reproduce. The warning’s look is Transparency and Gamut in preferences.

The eyedropper can show slightly different values on a CMYK JPEG. That open report is ArtCraft issue 2747, on the troubleshooting page already linked above. Sample a CMYK JPEG as a check, and keep the original. A press delivery that depends on a sample you cannot reconcile is the wrong job for this alpha, which is What early alpha means. The flat file a printer receives, if they do not want the layered document, is Send a flat picture and keep the layers.

Indexed Color and GIF do not yet keep the same palette

Indexed Color is one of the modes under Image, then Mode. GIF is a Save As format, not an Export As format, in the file-formats guide. Saving Indexed Color images as GIF can change the palette, and some tools then add colors outside it. The troubleshooting page lists that as open, issues 11824 and 11826, checked 21 November 2026. Export a PNG when you need the colors you see and you can accept PNG. If the job truly is a GIF, compare the palette after the save on a copy, and do not overwrite the indexed original. The same copy rule is Open and save a PSD without losing the original when the source was a PSD.

Print still uses the dialog on this page. Printer, copies, paper, orientation, scale to fit, marks, and who manages color are unchanged by the GIF bug. On Windows, PhotoCraft Manages Colors means the printer’s own color management should be off in Print Settings. On Linux the path is CUPS, or the system dialog if CUPS has no printer. Save as PDF at the bottom of the print dialog is the way to a PDF without a printer. A soft proof before that print is the preview. The print is the commitment.